---
title: "Deleting/Unpairing a Device in Control"
slug: "deleting-unpairing-a-display-in-control"
updated: 2026-04-15T20:37:22Z
published: 2026-04-15T20:37:22Z
canonical: "support.skykit.com/deleting-unpairing-a-display-in-control"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.skykit.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Deleting/Unpairing a Device in Control

1. In **Control**, click on the **Device** you would like to delete
2. Click the red **DELETE DEVICE** button at the bottom of the page

![A prominent button labeled 'DELETE DEVICE' for removing a device from a list.](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Screenshot 2026-04-15 at 3.28.03 PM.png)
3. Click **YES, DELETE DEVICE**

![Confirmation prompt to delete a device from the tenant account.](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Screenshot 2026-04-15 at 3.28.11 PM.png)

If the device is **online** at the time of unpairing, it will reboot, then display a pairing code. If desired, [it can be paired again](/v1/docs/getting-started-with-skykit-control).

> [!WARNING]
> Device Move
> 
> If you are unpairing because the device needs to be in a different Tenant, you can instead use [Device Move](/v1/docs/understanding-the-device-management-page).

If the device is **offline** at the time of unpairing, it will continue to play cached content until it comes back online.

This action cannot be undone. If you delete a device in Control, it will also be deleted from Beam.