---
title: "Reports Overview"
slug: "reports-overview"
updated: 2023-03-30T15:51:57Z
published: 2023-03-30T15:51:57Z
canonical: "support.skykit.com/reports-overview"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.skykit.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Reports Overview

## Reports Window

In the **Reports** window you can generate four types of reports for all devices in the tenant:

- **Device State Report**: Details the last heartbeat of each device in the tenant at the time the report was generated, as well as network and firmware information, when the device was last updated, and the last command sent.
- **Device Config Report**: Details the configurations for each device in the tenant at the time the report was generated. The report columns correspond to the configurations you set up in the **Status** tab of the device detail window.
- **Beam State Report**: Details the last heartbeat given back from Skykit Beam for all devices in the tenant, as well as information about the content playing on each device at the time of the heartbeat.
- **Beam Config Report**: Details the configurations set in Beam, such as the display ratio, fallback content, and the type of content playing, for each device in the tenant at the time the report was generated.

![Reports window](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Reports_Window_Updated.png)

For each report listed, you see what type of report it is, the date and time it was created, the email address of the user who created it, the number of devices included in the report, and the job trace ID (a value that customers can provide to Skykit support as a reference when they report an issue).

## Generating a Report

To generate a report:

1. Select **Reports** on the navigation bar to open the **Reports** window.
2. Select **Generate** **Report**. The **Create Report** window opens.
3. Choose a report type from the drop-down list.  
  
![Create Report window](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Create_Report_Window.png)
4. Select **Generate**. A notification in the lower left corner of the window shows you the progress of the report and alerts you when it is complete.  
  
The new report appears at the top of the report list.
5. Select the download icon to view report details.

A periodic signal sent from a device to indicate normal operation.