--- title: "Setting Up a New Skykit Player: First Boot Checklist and Troubleshooting" slug: "setting-up-a-new-skykit-player" description: "Skykit First Boot Checklist: connect HDMI and power, confirm Ethernet or Wi-Fi, complete mobile activation, and verify content in Beam or Control." updated: 2026-11-18T17:14:40Z published: 2026-11-18T17:14:40Z canonical: "support.skykit.com/setting-up-a-new-skykit-player" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.skykit.com/llms.txt > Use this file to discover all available pages before exploring further. # Setting Up a New Skykit Player: First Boot Checklist and Troubleshooting ## First Boot Checklist **Skykit pre-registers most players to your account before they ship.** When you plug in your device and connect it to the internet, it will update its apps if needed and start playing content. You usually won’t see a pairing code or need to pair anything. If you asked us to set up your Wi-Fi in advance, it should also connect to Wi-Fi by itself. If you did not and plan to use Wi-Fi rather than Ethernet or mobile, you will need connect it to a Wi-Fi network. ### Before you power on, check that: - The player is connected to the display with the HDMI cable, and the display is set to that HDMI input. - You’re using the power adapter that came in the box, pushed in all the way. - Make sure the player can get online - **Ethernet (recommended):** The cable is plugged firmly into the player and into a live network port. - **Wi-Fi:** You have the remote or a USB keyboard and mouse (not needed for touch screen devices). You also have the network name and password, which are case sensitive. In rare cases, the Wi-Fi may have been configured in advance. - **Mobile (cellular):** The SIM card comes already installed. - **Antennas:** Attach every antenna that came in the box and tighten each one fully. - **Activation:** Skykit may have told you we’ll manage activation. If not, activate the SIM and register the player’s IMEI with your mobile carrier before you power on. - The network you’re connected to is compatible with Skykit devices: - We recommend that network isn’t a guest or public Wi-Fi network, and it doesn’t have a sign-in page. - Your firewall allows the sites in [Network Firewall Configuration for Skykit](/v1/docs/network-firewall-configuration-for-skykit). ### What a normal first boot looks like 1. **The Skykit loading screen appears** shortly after you connect power. 2. **The player connects to the internet.** Ethernet, Wi-Fi that Skykit set up, and mobile connect automatically. Otherwise, follow the on-screen prompts to choose your network. See [Connect a Media Player to a Wireless Network](/v1/docs/connecting-an-android-media-player-to-a-wireless-network). 3. **The player updates its apps if needed.** This usually takes a minute or two. Don’t unplug it while it updates. 4. **Your content starts playing.** The player shows up under **Displays** in Skykit Beam and **Devices** in Skykit Control, already in your Tenant. To choose what it plays, open the display in Beam and select **Change**. ### Something doesn’t look right | What you see | What it usually means | What to do | | --- | --- | --- | | Wi-Fi setup prompts, even though you asked Skykit to set up Wi-Fi. | The player can’t reach the saved network. It may be out of range, or the network name or password may have changed. | Move the player closer to the access point, or pick your network on screen. To change Wi-Fi later, select the gear icon on the loading screen, then **Edit Wifi**. You can also add a network on the [Network Tab](/v1/docs/network-tab-skykit-control) in Skykit Control, but the device would need to be connected via another method such as Ethernet to receive that configuration and connect to the network. | | The loading screen for more than 5 minutes. | The player isn’t online, or an update has stalled | Check the cable or Wi-Fi. Then unplug the player for 30 seconds and plug it back in. If it keeps restarting, see [My player keeps restarting or is stuck on the Skykit loading screen](/v1/docs/my-players-keeps-restarting-or-is-stuck-on-the-skykit-loading-screen). | | A **pairing code.** | Skykit didn’t pre-register this player, for example if you bought it from a reseller, or someone accidentally deleted the device’s record from Skykit Control or Skykit Beam. | A Beam Administrator can pair it under **Displays > Pair Display** ([Pairing a Display in Skykit Beam](/v1/docs/pairing-a-display-in-skykit-beam)) or in Skykit Control ([Pairing a Device in Skykit Beam](/v1/docs/getting-started-with-skykit-control)). If you expected it to be pre-registered, contact Support before pairing. | | A message that the device is already registered, or an error code | This is rare but can happen for a few reasons. | Support will need to assist. See **What to send Skykit Support** below. | | A black screen, or no picture at all. | A display or power problem. | Check the HDMI input, then see [My Skykit player won’t turn on](/v1/docs/my-skykit-player-won-t-turn-on-no-lights-no-picture). | ### If the on-screen keyboard disappears during Wi-Fi setup Plug in a USB keyboard and type the password directly, or use the remote’s arrow keys or a USB mouse to select the password field again. To open Wi-Fi settings again later, [initiate the disagnostic screen](/v1/docs/understanding-the-diagnostic-screen), which has an **Edit Wifi** button. ### Check that it worked - The player shows **Online** in Beam or Control. - The content you expect is playing on the screen. ### What to send Skykit Support If you’re still stuck, email [support@skykit.com](mailto:support@skykit.com) with: - The model (for example P7, P3 or E300) and serial number from the label on the bottom - What the screen shows (a photo helps), and any error code - Your Account and Tenant name - Whether you’re using Ethernet, Wi-Fi, or mobile - How many players are affected, if you’re setting up several