---
title: "SKP Pro Mobile - Setup Guide"
slug: "skp-pro-mobile-installation-guide"
description: "Learn how to set up your SKP Pro Mobile device so you can play content on your displays."
updated: 2026-04-21T15:32:17Z
published: 2026-04-21T15:32:17Z
canonical: "support.skykit.com/skp-pro-mobile-installation-guide"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.skykit.com/llms.txt
> Use this file to discover all available pages before exploring further.

# SKP Pro Mobile - Setup Guide

This article walks you through the steps you need to complete to get your new SKP Pro Mobile Media Player up and running.

## Hardware and Tools

**What's in the box:**

- 1 SKP Pro Mobile
- 1 remote
- 2 AAA batteries (for the remote)
- Power adapter
- HDMI cable
- Mounting bracket

**What you need:**

- Display monitor with an HDMI port
- Micro SIM Card (for mobile connectivity)
- T10HX40 Torx driver (to remove SIM card security cover)

## **Device Setup**

#### **Step 1 - Connect HDMI cable**

Connect your Skykit Media Player to the display using the HDMI cable.

#### **Step 2 - Insert your SIM card**

Using the T10HX40 driver, remove the security plate from the back of the device, then insert your activated SIM card with the copper connectors facing up and the end **without** the notch inserted first.

#### **Step 3 - Connect power cable**

Connect your Skykit Media Player to power using the power adapter.

#### **Step 4 - Software updates**

Once you have connected your device to the internet, it checks for any software updates and installs them.

#### **Step 5 - Pair your Device**

After your device has updated, a **Pairing Code** is displayed on the screen. You will need this code to pair your device with Skykit Beam. See [Pairing a Display in Skykit Beam](/v1/docs/pairing-a-display-in-skykit-beam) for instructions.

**Note**: You will **not** need to perform this step if you purchased your device from Skykit directly.

#### **Step 6 - Display content**

Head to [beam.skykit.com](https://beam.skykit.com/) and log in. Once you have logged in, select **Displays** from the navigation bar to see your device(s). Select the display you want to update to open the **Displays** detail window and then select the **Change** button to choose the content you would like to display.