---
title: "E100 Non-Mobile Setup Guide (Discontinued)"
slug: "skp-pro-non-mobile-installation-guide"
description: "Learn how to set up your SKP Pro non-mobile device so you can play content on your displays."
tags: ["media players", "SKP Pro Non-Mobile"]
updated: 2026-04-21T14:57:29Z
published: 2023-02-17T21:07:13Z
canonical: "support.skykit.com/skp-pro-non-mobile-installation-guide"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.skykit.com/llms.txt
> Use this file to discover all available pages before exploring further.

# SKP Pro Non-Mobile Setup Guide

This article walks you through the steps necessary to get your new **SKP Pro Non-Mobile** Media Player up and running.

## Hardware and Tools

**What's in the box:**

- 1 SKP Pro Non-Mobile
- 1 remote
- 2 AAA batteries (for the remote)
- Power adapter
- HDMI cable
- Mounting bracket

**What you need:**

- Display monitor with an HDMI port
- Internet connection (Wi-Fi or Ethernet)
- Ethernet cable (if you're connecting via Ethernet)

## Device Setup

#### **Step 1 - Connect HDMI cable**

Connect your Skykit Media Player to the display using the HDMI cable.

#### **Step 2 - Connect power cable**

Connect your Skykit Media Player to power using the power adapter.

#### **Step 3 - Connect to Internet**

When your device has powered on, use the remote and follow the onscreen prompts to connect to an available Wi-Fi network.

If you're using Ethernet, simply plug your Ethernet cable into the back of your device.

#### **Step 4 - Software updates**

Once you have connected your device to the internet, it will check for any available software updates and install them.

#### **Step 5 - Pair your device**

After your device has updated, a **Pairing Code** is displayed on the screen. You will need this code to pair your device with Skykit Beam. See [Pairing a Display in Skykit Beam](/v1/docs/pairing-a-display-in-skykit-beam) for instructions.

**Note**: You will **not** need to perform this step if you purchased your device from Skykit directly.

#### **Step 6 - Display content**

Head to [beam.skykit.com](https://beam.skykit.com/) and log in. Once you have logged in, select **Displays** from the navigation bar to see your device(s). Select the display you want to update to open the **Displays** detail window and then select the **Change** button to choose the content you would like to display.