---
title: "Updating Wi-Fi Settings"
slug: "updating-wi-fi-settings"
description: "Learn how to update the Wi-Fi settings on an Android device."
updated: 2025-04-02T22:09:58Z
published: 2025-04-02T22:09:58Z
canonical: "support.skykit.com/updating-wi-fi-settings"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.skykit.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Updating Wi-Fi Settings

See the instructions below for steps on how to update the wi-fi settings. There are three methods to update the Wi-Fi settings.

**Note**: The following methods are for either **Skykit hardware** or **Skykit-approved devices**.

## **Method 1: Device Setup Window**

1. Restart your device.
2. Using the device remote, USB Keyboard, or touch, select the gear icon in the lower left corner of the Skykit loading window.  
  
![Skykit loading window](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Updating%20Wifi%201.png)  
  
The **Device Setup** window opens.  
  
![Device Setup window](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Updating%20Wifi%202.png)
3. Select **Edit Wifi** to open a new window that lists your available networks.
4. Select your network to connect to it.

Once your device has successfully connected to the internet, it will check to make sure all apps are up to date and continue playing your content.

## **Method 2: Diagnostic Screen**

1. Ensure your device is powered on.
2. Initiate the **Diagnostics** screen:
  - If your device has a remote, press the **Home** button and the numbers **1 3 9 7**, in that order.
  - If you're using a USB keyboard, you can enter **1 3 9 7**, in that order and hit enter.
  - If your device is a touch-screen, tap the **T****op Left - Top Right - Bottom Right - Bottom Left** corners of the screen.
3. Select the **Edit Wifi** button towards the bottom of the **Diagnostics** screen.  
  
![Diagnostics screen - Edit Wifi button showing](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Updating%20Wifi%203.png)
4. Select **Edit Wifi** to open a new window that lists your available networks.
5. Select your network to connect to it.
6. Once you have successfully connected to the internet, you should see green check marks next to all of the connections.  
  
![All connections completed](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Updating%20Wifi%204.png)

## **Method 3: System Settings (Advanced)**

This method is typically only used for troubleshooting purposes. If you are unable to connect using the above two methods, please contact Skykit Support and we will assist you with the following steps.

**Skykit Support** **Email:** support@skykit.com **Hours of Operation:** M-F 8AM to 5PM CST

1. Restart your device.
2. On the Skykit loading window, use the device remote or touch screen to select the **Lock** icon in the bottom right corner of the screen.  
  
![Skykit loading window](https://cdn.document360.io/86c4dfb2-4202-4f4a-97e1-d24441ae8c90/Images/Documentation/Updating%20Wifi%205.png)  
  
A prompt opens. This is where you will enter the device-specific **Exit Code** provided by Skykit Support.

Skykit Control now shows where you can select **Manage Wifi** to connect to a Wi-Fi network.