--- title: "My player keeps restarting or is stuck on the Skykit loading screen" slug: "my-players-keeps-restarting-or-is-stuck-on-the-skykit-loading-screen" updated: 2026-11-12T20:30:30Z published: 2026-11-12T20:30:30Z canonical: "support.skykit.com/my-players-keeps-restarting-or-is-stuck-on-the-skykit-loading-screen" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.skykit.com/llms.txt > Use this file to discover all available pages before exploring further. # My player keeps restarting or is stuck on the Skykit loading screen If your Skykit player restarts over and over or never gets past the Skykit loading screen, the cause is usually power, content, or network issues rather than a failed device. Work through the steps below in order. Each one takes only a few minutes, and Skykit Support will ask about them if you are unable to resolve the issue and need to contact them. ## Restart Loops / Boot Loops ### Is it really a restart / boot loop? Some restarts are expected: - **Scheduled reboots.** Your device may be set to reboot at a set time each day or week. In Skykit Control, check the [Status Tab](/v1/docs/status-tab) to see if the **Scheduled Reboot** toggle is enabled. - **Recovery restarts.** Control automatically restarts the player in scenarios including high memory use, repeated network dropping, or after repeated video playback failures. The video-fault reboot only happens after 20 minutes of uptime, so restarts every few minutes should not be caused by this. - **Dashboard refreshes.** Dashboards set to a very short refresh window that don’t allow enough time for login to compete can behave in a way that resembles boot looping. To see how often a device is really restarting, opn the device in Skykit Control and check [Event History](/v1/docs/event-history). Each restart is listed as a **Boot** event. If you see boot events every few minutes or the screen never shows content, continue below. ### Check the Power Supply Power is the most common cause of restart loops and of players being stuck on the loading screen. 1. Make sure you’re using the **Skykit power adapter that came with the device**. Third party adapters, even ones with the same plug, may not supply enough power. 2. Check that the power plug is **pushed all the way in**. On the E300, [the plug has small notches](/v1/docs/why-won-t-my-e300-device-power-on) than must line up with the port before it seals fully. 3. Plug the device directly into a different wall outlet. 4. If you have another Skykit player of the same model known to be working, swap in its power adapter. A damaged or worn out adapter is a common cause. ### Power Cycle the Device Unplug the device, wait at least 10 seconds, and plug it back in. If the device is online, you can also use **Reboot Device** in **Skykit Control** or **Restart Display** in **Skykit Beam**. ### Rule Out Content Issues The content playing on the display could also be the root cause. 1. In Skykit Beam, go to **Displays**, select the Display, and use the **Change** button to play a simple content item such as a single static image. 2. Watch the Display for 30-60 minutes or check the **Event Tab** in Skykit Control after that amount of time for boot events. If the device stays stable with the image, the issue is probably the content, not the device. A common cause is **videos that are very large, very high resolution, or have a very high bitrate.** See [Optimizing Videos for Skykit Beam](/v1/docs/optimizing-videos-for-skykit-beam) for guidance. If other content plays without issue, contact Skykit Support for help determining the root cause of the content’s issue. Be sure to include the serial number of your device, the name of the content triggering the issue, and a description of the device’s behavior. ### Are you Running Your Own App? If you have a custom app running as your kiosk app and that app is continually crashing, the Home app will attempt to relaunch it every 10 seconds, which can look like a boot loop. ## Stuck on Loading Screen If your device is stuck on a static screen showing the Skykit logo, try the following: ### Open the Diagnostic Screen Initiate the [diagnostic screen](/v1/docs/understanding-the-diagnostic-screen), noting whether you see any error messages. ### Update Apps Very out of date apps can sometimes cause devices to get stuck on the loading screen. Update apps on the [Apps Tab](/v1/docs/apps-tab-skykit-control) in Skykit Control. ### Try Republishing or Playing Different Content Occasionally content can get into a bad state, causing the device to get stuck. Try making a small update to the content playing, then publishing it. You can also try playing other content, such as a simple static image. ### Confirm the device is Still Paired A deleted device can sometimes show the loading screen instead of a new pairing code. Check Skykit Beam or Skykit Control to confirm your device is still paired to your Tenant. ### Check the Network If the steps above don’t resolve the issue, check your device’s connectivity. Connectivity can be relevant in cases such as: - Web-based content - Content that hasn’t been cached yet - New, factory reset, or moved devices ## Factory Reset If the steps above don’t help and the device shows as online in Skykit Control, you can try a **Factory Reset** from the device’s **Status Tab**. > [!CAUTION] > Warning > > A factory reset permanently erases all data on the device and restores it to factory settings. It will lose any saved Wi-Fi credentials, so you will need to reconnect the device. Only take this step if you have physical access to the device. Use the **Factory Reset** option in **Skykit Control** rather than resetting from the device’s Android settings. If the device restarts too quickly to receive commands or shows as offline in Skykit Control, don’t keep retrying. Contact Skykit Support instead. ## When it Might be a Hardware Problem If none of the steps above help, the device may need to be replaced. Contact Skykit Support with the details below. Support checks [warranty status](/v1/docs/skykit-hardware-warranty-and-lifecycle) from the device’s serial number. If the device is not under warranty, Support can help you purchase a replacement. ### What to Send Skykit Support Email [support@skykit.com](mailto:support@skykit.com) with: - The **serial number** of the affected device. This is on the sticker on the device as well as Skykit Beam and Skykit Control. - **What you see:** Constant restarts, stuck on the loading screen, etc. Include a photo or short video of the behavior if you can. - **When it started**, and anything that changes around that time such as new content, a settings change, a new power adapter, or a network change. - **What you’ve tried** from the steps above and what happens. ## Related Articles - [Skykit Media Player Warranty & Lifecycle](/v1/docs/skykit-hardware-warranty-and-lifecycle) - [Status Tab](/v1/docs/status-tab) - [Event History](/v1/docs/event-history) - [Troubleshooting Connectivity Incidents](/v1/docs/troubleshooting-connectivity-incidents) - [Can I stop a daily reboot schedule?](/v1/docs/can-i-stop-a-daily-reboot-schedule)