--- title: "P3 Setup Guide (Discontinued)" slug: "p3-installation-guide" description: "Learn how to set up your SKP3 media player so you can play content on your displays. " tags: ["SKP3", "media players"] updated: 2026-11-18T21:30:07Z published: 2026-11-18T21:30:07Z canonical: "support.skykit.com/p3-installation-guide" --- > ## Documentation Index > Fetch the complete documentation index at: https://support.skykit.com/llms.txt > Use this file to discover all available pages before exploring further. # P3 Setup Guide (Discontinued) This article provides you with the steps you need to complete to get your new P3 Media Player up and running. ## Hardware and Tools **What's in the box**: - 1 P3 - 1 remote - 2 AAA batteries (for the remote) - Power adapter - HDMI cable - Double-sided velcro **What you need**: - Display monitor with an HDMI port - Internet connection (Wi-Fi or Ethernet) - Ethernet cable (if you're connecting via Ethernet) ## **Device Setup** #### **Step 1 - Connect HDMI cable** Connect your Skykit Media Player to the display using the HDMI cable. #### **Step 2 - Connect power cable** Connect your Skykit Media Player to power using the power adapter. #### **Step 3 - Connect to the Internet** When your device has powered on, use the remote and follow the on-screen prompts to connect to an available Wi-Fi network. You can also use a mouse or a keyboard as a replacement for the remote. If you're using Ethernet, simply plug in your Ethernet cable into the back of your device. #### **Step 4 - Software updates** Once you have connected your device to the Internet, it will check for any software updates. #### **Step 5 - Pair your device** After your device has updated, a **Pairing Code** is displayed on the screen. You will need this code to pair your device with Skykit Beam. See [Pairing a Display in Skykit Beam](/v1/docs/pairing-a-display-in-skykit-beam) for instructions. **Note**: You will **not** need to perform this step if you purchased your device from Skykit directly. #### **Step 6 - Display content** Go to [beam.skykit.com](https://beam.skykit.com/) and log in. Once you have logged in, select **Displays** from the navigation bar to see your device(s). Select the display you want to update to open the **Displays** detail window and then select the **Change** button to choose the content you would like to display. HDMI-CEC on Your Display Displays often have HDMI-CEC connection turned on by default which can cause the P3 to go into sleep mode (displays red light) when you turn the TV off. HDMI-CEC then does not send a command to the P3 when the TV turns back on. If you plan to turn off the display frequently, you will want to turn off HDMI-CEC in your display settings. See [Publishing Content to a Display](/v1/docs/publishing-content-to-a-display) to learn more.