SKP Pro Mobile - Installation Guide
  • 17 Feb 2023
  • Dark
  • PDF

SKP Pro Mobile - Installation Guide

  • Dark
  • PDF

Article summary

This article walks you through the steps you need to complete to get your new SKP Pro Mobile Media Player up and running.

Hardware and Tools

What's in the box:

  • 1 SKP Pro Mobile
  • 1 remote
  • 2 AAA batteries (for the remote)
  • Power adapter
  • HDMI cable
  • Mounting bracket

What you need:

  • Display monitor with an HDMI port
  • Micro SIM Card (for mobile connectivity)
  • T10HX40 Torx driver (to remove SIM card security cover)

Device Setup

Step 1 - Connect HDMI cable

Connect your Skykit Media Player to the display using the HDMI cable.

Step 2 - Insert your SIM card

Using the T10HX40 driver, remove the security plate from the back of the device, then insert your activated SIM card with the copper connectors facing up and the end without the notch inserted first.

Step 3 - Connect power cable

Connect your Skykit Media Player to power using the power adapter.

Step 4 - Software updates

Once you have connected your device to the internet, it checks for any software updates and installs them.

Step 5 - Pair your Device

After your device has updated, a Pairing Code is displayed on the screen. You will need this code to pair your device with Skykit Beam. See Pairing a Display in Skykit Beam for instructions.

Note: You will not need to perform this step if you purchased your device from Skykit directly.

Step 6 - Display content

Head to and log in. Once you have logged in, select Displays from the navigation bar to see your device(s). Select the display you want to update to open the Displays detail window and then select the Change button to choose the content you would like to display.

Was this article helpful?