If your Skykit media player has stopped working, Skykit Support can replace it. Covered devices are replaced under warranty; others can be replaced by purchase. You don't need to check the warranty yourself: Support confirms it from the serial number.
The process has four steps:
Try the quick checks below. Many "broken" players are a power supply or cable problem.
Email Support with the details in the checklist.
Support confirms the fault and the warranty status.
Skykit ships the replacement and you set it up.
Step 1: Try these checks first
Support will ask whether you've tried these, so doing them first gets you a replacement faster.
What you see | Try this first |
|---|---|
No lights, the player won't power on | Plug it into a different outlet, then swap in a known-working Skykit power supply. See My Skykit player won't turn on. |
Keeps restarting or stuck on the Skykit loading screen | Swap the power supply, then switch to a single static image. See My player keeps restarting or is stuck on the Skykit loading screen. |
No picture on the screen | Try a different HDMI cable and HDMI port, and check Live View in Skykit Beam or Skykit Control to see whether the player is playing. See Why is Live View showing content playing when my screen is black? |
Fuzzy picture or static behind content | Swap the power supply; this is often the adapter, not the player. |
Can't connect to Wi-Fi | Unplug the player for 30 seconds, then open the diagnostic screen and check the network status. |
Please don't factory reset the player unless Support asks you to.
Is my player under warranty?
Support checks this for you from the serial number, but here's what to expect. Skykit players carry a 2- or 3-year warranty against defects in materials and workmanship. If your contract includes specific hardware terms, those apply instead. See Skykit Media Player Warranty for more details.
Not covered: physical damage, storm or lightning damage, power surges or brownouts, and water or other liquids. These players can still be replaced by purchase.
Where to find the serial number: on the sticker on the player, or on the device's details in Skykit Beam or Skykit Control. The model is listed on the Devices page in Skykit Control.
Step 2: What to send Skykit Support
Email support@skykit.com. A complete request usually avoids a round of back-and-forth. Include:
Serial number of each affected player
What's wrong and when it started (for example, "no lights since Monday's power outage")
What you've tried from the checks above: a different outlet, power supply, HDMI cable or port
A photo of the screen, the lights on the player, or the diagnostic screen if it shows an error
Shipping address and an on-site contact (name and phone) for the replacement
How many players are affected, if more than one at the same location
Steps 3 and 4: What happens next
Support reviews your request. They may ask for one or two more checks, or look at the player's restart reasons and status remotely.
Support confirms the fault and warranty status. If the player is covered, the replacement is free. If it isn't covered or was physically damaged, Support explains the purchase options.
Skykit ships the replacement. Let Support know if you need any specific device configurations set up in advance such as Wi-Fi network.
Set up the replacement.
Frequently asked questions
My player is old. Is it still covered? Send Support the serial number and they'll confirm. Players past their warranty can still be replaced by purchase.
My player was damaged in a storm or power surge. Can I get a replacement? Yes, by purchase. Physical and electrical damage isn't covered by the warranty.
Several players at one site stopped at the same time. Are they all broken? Probably not; it is very unlikely for a hardware failure to happen to multiple devices at the same time. Check power and connectivity troubleshooting first. When contacting support, make sure to include all the serial numbers affected.