If your Skykit media player shows no lights on the device and nothing on the screen, the cause is usually power delivery, not a failed device. A loose plug, a switched off outlet, or a worn out power adapter can make a working player look dead. Work through these checks before contacting Support. Support will ask about them, so trying these first gets you help faster.
Is it the player or the screen?
Look at the Skykit device itself, not just the screen.
The player has a light on, but the screen is black: the player is probably running, and the problem is with the display or its HDMI connection. See Why is Live View showing content playing when my screen is black?
The player has no lights at all: continue with the steps below
Note
The remote that comes with some players doesn’t turn the device on or off. For the P3, the button does nothing, where for the P7, it puts the device in and out of standby mode. If your P7 is not playing content and is showing a red light, try the on/off button on the remote.
Check the Power Connection
All Devices: Check that the power adapter is plugged firmly into both the player and the outlet.
E300: The plug has small tabs that must line up with notches in the port. See Why won't my E300 device power on?
F-Series using Power over Ethernet (PoE): Make sure the network switch port supplies PoE+ (IEEE 802.3at). If you’re not sure, try the power adapter instead.
Try a Different Outlet
Plug the player directly into a different wall outlet that you know works. Some outlets are controlled by a light switch or are on a breaker that’s been turned off.
Swap in a Known-Working Skykit Power Adapter
A damaged or worn out power adapter is one of the most common reasons a player won’t start. If you have another Skykit player of the same model known to be working, try its adapter.
Always use the Skykit adapter that came with your device. Other adapters, even ones with the same plug, may not supply enough power.
Check the Power Button
Most Skykit players turn on automatically when they get power. Some have a power button.
Model | Power Button |
|---|---|
E300 | Turns on when plugged in. If it doesn’t, try pressing the power button on the front. |
E400 | The front button doesn’t turn the player on or off. Its light shows whether the player is on. |
E500 | Turns on when plugged in. If it doesn’t, try pressing the power button on the front. |
Check the Device in Skykit Control or Skykit Beam
If the player shows as Offline in Control and/or Beam, it may have lost power or just lost its network connection. If it shows as Online, it should have power.
When it Might be a Hardware Problem
If the player still won’t power on after trying the steps above, it may need to be replaced. Contact Skykit Support with the details below.
Is my device under warranty?
Skykit Support can look this up based on the serial number. For more information, see Skykit Media Player Warranty & Lifecycle. If your device is not under warranty, a replacement can be purchased.
What to Send Skykit Support
Email support@skykit.com with:
Serial number of the device.
When it stopped working and anything that happened around then such as a power outage, storm, move, or new adapter.
What you’ve tried including a different outlet, different adapter, or the power button.
A photo of your player showing the power connection.
The shipping address and contact name in case a replacement is needed.