Most Skykit media players have a small status light. For most models, it tells you whether the player is getting power. It doesn’t tell you whether the player is connected to the internet or to Skykit services.
What the Lights Mean
Model | Light | What it Means |
|---|---|---|
P3 (SKP3) | Solid blue | The player is on and running. |
P3 (SKP3) | Red, or blinking red when starting up | The player isn’t getting enough power. The power adapter may have failed. |
P7 | Blue | The player is on. |
P7 | Red | The player is in standby mode. This could be because the device was put in standby mode by pressing the power button on the remote or because the device is on standby because no content is available to play. |
E300 | Light in the front button | Shows whether the player is on. |
E400 | Light in the front button. | Shows whether the player is on. The button itself does not turn the player on or off. |
E500 | Light in the front button | Shows whether the player is on. |
F10 Displays: The LED light bar on F10 displays isn’t a status light. It’s controlled by the app running on the display; for example to show whether a meeting room is free or booked.
CMA 1000 Devices: These devices have a light that indicates the strength of its mobile (cellular) connection. This is not an indicator of power or online status. A red light means there is no mobile connection, though this is not necessarily a problem since these devices can be connected to Wi-Fi or Ethernet.
CMA 1000 Light Color | Mobile Signal |
|---|---|
Blue | Best |
Green | Good |
Yellow | Okay |
Red | No mobile connection. This does not necessarily mean the device is offline as it can be connected via Ethernet or Wi-Fi. This device will prioritize Ethernet connections first, then Wi-Fi, then mobile. |
A Light Doesn’t Mean the Player is Online
An indicator light means the player has power, but this does not mean the player is connected to the internet and Skykit services. A player can have a light and still shows as Offline in Skykit if its network connection has dropped.
To check whether a player is online:
In Skykit Beam, go to Displays and check the display’s status
In Skykit Control, go to Devices and check the display’s status
If the Light is Red
A red or blinking light on a P3, especially with a black screen or a player that keeps going offline, usually points to a failed power adapter. This is more common for devices that have been in use for several years.
Make sure power adapter is plugged firmly into the player and into a working wall outlet.
Swap in a known-working Skykit power adapter for the same model. Use only the adapter made for your model. Other adapters, even with the same plug, may not supply enough power.
If the light turns blue and the player starts normally, the old adapter was the problem.
If the light stays red with a known-working adapter and outlet, contact Support.
What to Send Skykit Support
Contact support@skykit.com with:
The serial number of the device
The color of the light and whether it’s solid or blinking
What’s on the screen, if anything (a photo helps)
What you’ve tried, such as a different adapter or outlet