🎉 New to Skykit? Get up and running fast — Free live training + on-demand resources — Start here →

Setting Up a New Skykit Player: First Boot Checklist and Troubleshooting

Prev Next

First Boot Checklist

Skykit pre-registers most players to your account before they ship. When you plug in your device and connect it to the internet, it will update its apps if needed and start playing content. You usually won’t see a pairing code or need to pair anything.

If you asked us to set up your Wi-Fi in advance, it should also connect to Wi-Fi by itself. If you did not and plan to use Wi-Fi rather than Ethernet or mobile, you will need connect it to a Wi-Fi network.

Before you power on, check that:

  • The player is connected to the display with the HDMI cable, and the display is set to that HDMI input.

  • You’re using the power adapter that came in the box, pushed in all the way.

  • Make sure the player can get online

    • Ethernet (recommended): The cable is plugged firmly into the player and into a live network port.

    • Wi-Fi: You have the remote or a USB keyboard and mouse (not needed for touch screen devices). You also have the network name and password, which are case sensitive. In rare cases, the Wi-Fi may have been configured in advance.

    • Mobile (cellular): The SIM card comes already installed.

      • Antennas: Attach every antenna that came in the box and tighten each one fully.

      • Activation: Skykit may have told you we’ll manage activation. If not, activate the SIM and register the player’s IMEI with your mobile carrier before you power on.

  • The network you’re connected to is compatible with Skykit devices:

What a normal first boot looks like

  1. The Skykit loading screen appears shortly after you connect power.

  2. The player connects to the internet. Ethernet, Wi-Fi that Skykit set up, and mobile connect automatically. Otherwise, follow the on-screen prompts to choose your network. See Connect a Media Player to a Wireless Network.

  3. The player updates its apps if needed. This usually takes a minute or two. Don’t unplug it while it updates.

  4. Your content starts playing. The player shows up under Displays in Skykit Beam and Devices in Skykit Control, already in your Tenant. To choose what it plays, open the display in Beam and select Change.

Something doesn’t look right

What you see

What it usually means

What to do

Wi-Fi setup prompts, even though you asked Skykit to set up Wi-Fi.

The player can’t reach the saved network. It may be out of range, or the network name or password may have changed.

Move the player closer to the access point, or pick your network on screen. To change Wi-Fi later, select the gear icon on the loading screen, then Edit Wifi. You can also add a network on the Network Tab in Skykit Control, but the device would need to be connected via another method such as Ethernet to receive that configuration and connect to the network.

The loading screen for more than 5 minutes.

The player isn’t online, or an update has stalled

Check the cable or Wi-Fi. Then unplug the player for 30 seconds and plug it back in. If it keeps restarting, see My player keeps restarting or is stuck on the Skykit loading screen.

A pairing code.

Skykit didn’t pre-register this player, for example if you bought it from a reseller, or someone accidentally deleted the device’s record from Skykit Control or Skykit Beam.

A Beam Administrator can pair it under Displays > Pair Display (Pairing a Display in Skykit Beam) or in Skykit Control (Pairing a Device in Skykit Beam). If you expected it to be pre-registered, contact Support before pairing.

A message that the device is already registered, or an error code

This is rare but can happen for a few reasons.

Support will need to assist. See What to send Skykit Support below.

A black screen, or no picture at all.

A display or power problem.

Check the HDMI input, then see My Skykit player won’t turn on.

If the on-screen keyboard disappears during Wi-Fi setup

Plug in a USB keyboard and type the password directly, or use the remote’s arrow keys or a USB mouse to select the password field again. To open Wi-Fi settings again later, initiate the disagnostic screen, which has an Edit Wifi button.

Check that it worked

  • The player shows Online in Beam or Control.

  • The content you expect is playing on the screen.

What to send Skykit Support

If you’re still stuck, email support@skykit.com with:

  • The model (for example P7, P3 or E300) and serial number from the label on the bottom

  • What the screen shows (a photo helps), and any error code

  • Your Account and Tenant name

  • Whether you’re using Ethernet, Wi-Fi, or mobile

  • How many players are affected, if you’re setting up several